Tag Archives: Technician certificate

16 Graduate from NCEHSE OSHA Course

16 students graduated this week with a certificate and OSHA credentials in General Industry. With over 100 more students already scheduled before December 2016, things are hoping at NCEHSE. To find out more about or certificate, certification, and degree programs; give us a call at 575-624-7381

Interview: You Lost your Job.. Now go get the one you Want!

This is a video from a classroom interview with Michael O’Berry, Director of NCEHSE

OSHA Training Classes for November and December

The National Center for EHS Education (NCEHSEDU) at ENMU-Roswell will be offering the following classes in November and December for businesses in and around Roswell, Artesia, Carlsbad, Hobbs and the Midland, Odessa area. For a more complete click on the class schedule above. To register, call 575-624-7164 and talk to Jessica.

November 12 and 13:
OSHA 10 Hour for Construction
ENMUR/NCEHSE RATE…$295 pp
This class is taught by Michael O’Berry and will encompass the requirements found in 29CFR1026 for OSHA outreach classes. Topics will include electrical, falls, caught in, / in-between, as well as arc flash, ppe, the updated confined space, and tool usage among others. Students will receive an OSHA 10 for construction card upon successful completion. This is a difficult class to find and anyone engaged in construction will find it essential in building a safe workplace at their company.
Class runs from 9 a.m. – 3 p.m. each day.

December 2-4:
Fall Protection Competent Person
ENMUR/NCEHSE RATE…$399 pp
Course covers the requirements found in both USACE, ANSI, 29CFR 1910, and 1926, (General Industry and Construction) for fall protection training. Training involves identifying potential fall hazards at jobsites, selecting the right equipment for anchorage points and personal fall arrest system inspection criteria. Program management, regulatory requirements of a Competent Person and multi-employer duties are also addressed.
Class runs from 8 a.m. – 5 p.m. each day.

December 9 – 11:
Record Keeping Essentials Class
ENMUR/NCEHSE RATE…$345 pp
This the combination of all three classes listed below. If you take all three together you save $100 when compared to taking them individually.
Class runs from 8 a.m. – 6 p.m. each day.

December 9:
OSHA 29CFR1904 Record Keeping (1-day class)
ENMUR/NCEHSE RATE…$125 pp
Over-reporting and mis-reporting of accidents and injuries cost companies millions of dollars annually. Not knowing how to properly report can affect insurance premiums and prevent companies from bidding on larger contracts. This course goes through the OSHA regulation 29 CFR 1904 and offers explanations and insight into who, what, when, and how of OSHA recordkeeping. Class will also cover the basics of developing training records that can lower the number of incidents at a company and boost employee involvement. If you are not familiar with OSHA’s Multi-Employer’s Worksite Policy, then you need to take this class before you let another subcontractor come onto your site.
Class runs from 8 a.m. – 6 p.m. each day.

December 10:
(JSA/JHA) Job Safety Analysis Development Training (1 day class)
ENMUR/NCEHSE RATE…$195 pp
The Job Safety Analysis (JSA) and Job Hazard Analysis (JHA) are the cornerstone of any quality safety program. Not only are they required by OSHA for just about every task, employers must certify that they have been done prior to starting work. Unfortunately, many companies do not know how to do one or they may have been taught incorrectly. This class covers the requirements for training and how OSHA suggest JSA’s and JHA’s should be done.
Class runs from 8 a.m. – 6 p.m. each day.

December 11:
Developing Defendable Training Records (1 day class)
ENMUR/NCEHSE Rate …$125
Creating, developing, and utilizing training records that can show the status of any employee at a moment’s notice is the goal of any effective safety program. What it takes to accomplish this has been well developed for the past 30 years but is known to only a few. This course follows the 3 tier approach to identifying, instructing, and evaluating the competency of employees on any job or task. Students will study just how easy it is to develop and maintain this management tool through hands on workshops, examples, and research. Regulations governing the accountability of training documentation is also covered in this essential course designed for all companies.
Class runs from 8 a.m. – 6 p.m. each day

New Classes, New Prices, New Schedule

The Customized Training Class Schedule is out and it has our newest classes available in-class on the Roswell campus. Just click on the Training Calendar link at the top of this page and you will find the latest schedule.

Featured is a specialized grouping of classes given back to back. You can take each class individually or save a hundred dollars and take them as a group. The choice is yours! Just make sure you tell us when you sign up!

Coming in January are on-line classes as well. We are currently offering the Creating Defendable Training Records as a free course to help us work out the bugs of a new LMS system of delivery. If you are interested in taking this FREE course simply click on the “Follow Us” on the right hand side of this page and request an registration by dropping us a line at director@ncehsedu.com

Free Training for those who “follow” our website

If you were one of the great professionals that “follow” our website and keep up with what we are doing, we want to “thank you”! We are offering a free course on “Developing Training Records”….. that won’t send you to jail. OSHA and many other agencies require training records that are accurate, timely, and reflect the current training of EVERY individual working for you. Many large “Bids” require access to company training records in order to place a bid on a contract and refuse companies that can not comply. This class will help you develop training records for your employees that are timely, accurate, and are defend-able. The on-line class will start 26 October and is 15 hours long.*** End time is when you finish the 15 hours, so you can take as long as you want to finish the class (this is a real class and you can get college credit if you are a ENMUR student). If you would like to take advantage of this free class please contact director@ncehsedu.com and we will send you a short registration form so we know who is in the class and arrange for your certificate.

2015 Fall Schedule… Classes Start Mid August, Sign up Today!

2015 Fall Schedule

Classes Start Mid August, Sign up Today!

SET 104                 4cr.         Hazard Control Engineering                                         On-line or In-class

SET 107                 3cr.         Introduction to Environmental Health                    On-line or In-class

SET 109                 1cr.         H2S Awareness (7am class)                                         In-class

SET 113                 1cr.         Intro to Design Prin of Const                                       On-line

SET 114                 1cr.         Workplace Safety for Employees Const                 On-line or In-class

SET 115                 1cr.         Workplace Safety for Employees Gen Ind             On-line or In-class

SET 201                 4cr.         Biomechanics / Ergonomics                                         On-line

CTE 230                 2cr.         Developing Leadership                                                  On-line

SET 231                 2cr.         Understanding OSHA Regs Gen Ind                         On-line

SET 232                 2cr.         Understanding OSHA Regs Const                              On-line

SET 233                 2cr.         Understanding OSHA Oil and Gas                             On-line

Fall Registration is Just around the Corner

You have decided that 2015 is the year you go after more education in the career you have chosen. We have lot’s of new classes, certifications, and classes available. Classes available are:
SET 104 Hazard Control Engineering (In-class and on-line)
SET 107 Intro to Environmental Engineering (In-class and on-line)
SET 109 H2S Awareness
SET 113 Intro to Design Principles of Construction (on-line)
SET 114 Workplace Safety for Employees- Construction (on-line)
SET 115 Workplace Safety for Employees – General Industry (on-line)
SET 201 Bio Mechanics/ Ergonomics (on-line)
SET 230 Developing Leadership (on-line)
SET 231 Understanding OSHA -General Industry (on-line)
SET 232 Understanding OSHA – Construction (on-line)
SET 233 Oil and Gas Regulations (on-line)

Many of the classes are 8 week classes and are apart of both the degree program and or one of the four certifications offered at ENMUR.

For more information on the classes, take a look at the course descriptions on this site or visit www.roswell.enmu.edu today!

New Classes to be Offered for 2015

CTE 230 – Developing Leadership (2cr)
This course introduces the essential concepts needed to develop leaders in an organization and improve the effectiveness of those already in those positions. Studies include but are not limited to: problem analysis, decision making, building teams, coaching, conflict management, goal setting, and accountability. An introduction to Behavior Based Safety management is included in this curriculum. This course is designed for new and or experienced supervisors, managers, and executives wanting to get the most out of their employees or just wanting to increase their effectiveness.

SET 231 – Understanding OSHA Regulations – General Industry (2cr)
Understanding the OSHA regulations concerning general industry activities is one of the more difficult tasks company owners, managers, and supervisors have to comply with on a daily basis. This course explains the regulations in easier to understand terms, concepts and language. Students taking this course will have a deeper understanding of the how and why of regulation development, insight as to what OSHA is looking for, and the general industry regulation (29CFR1910) applies to their business.

SET 232 – Understanding OSHA Regulations – Construction (2cr)
Understanding the OSHA regulations concerning construction activities is one of the more difficult tasks company owners, managers, and supervisors have to comply with on a daily basis. This course explains the regulations in easier to understand terms, concepts and language. Students taking this course will have a deeper understanding of the how and why of regulation development, insight as to what OSHA is looking for, and how the construction regulation (29CFR1926) applies to their business.

SET 233 – Oil and Gas Regulations (2cr)
Oil and Gas is currently a hot topic and the regulations governing it can be confusing. This course is designed for supervisors, managers, and safety professionals working in the oil and gas industry who want a better understanding of the regulations which include general industry, construction, recordkeeping, ANSI, and API.

SET 241 – H2S Hydrogen Sulfide Instructor Training (2cr)
This course covers the essential elements of ANSI Z390 and Z490 in regards to Hydrogen Sulfide training and what it takes to instruct an H2S awareness course. Students taking this course should have an awareness of the potential dangers of H2S and have a valid H2S awareness certificate or card from an accredited issuing entity that has not expired. Course content covers the ANSI and OSHA standards as well as referencing appropriate API/RP, State Rules, and modeling programs.

SET 240- The Professional Trainer (2cr)
This course covers ideas, concepts, and practices used by professional trainers to teach adults in all aspects of industry. Topics include but are not limited to: Program / course development, goal / objective setting, meeting standards, technology use, and classroom management techniques to increase student comprehension / retention, and instructional compliance. ANSI standards for instruction are used and taught in this course and students will be able to increase their training effectiveness upon successful completion. If you train adults or want to become a trainer then this course is for you.

SET 243- Medic First Aid Trainer (2cr)
Fall 2016
Having trained first aid and CPR individuals is not only a good idea but is required by regulations on many jobsites. Becoming a Medic First Aid Trainer allows experienced individuals to meet that challenge by providing the education and skills needed to instruct others in first aid and life saving skills. This course is perfect for EHS professionals, first responders, and others interested in learning needed skills and helping others save lives.

SET 242- Vehicle Control Safety Officer (2cr)

Vehicle Control Safety Officers (VCSO) are responsible for the management of vehicle fleets both large and small. These individuals supervise and or many times deliver driver training, schedule equipment maintenance, logistics, and are responsible for the drivers assigned to their company. This course is for those individuals looking to meet the requirements of a VCSO and or adding those duties to their job.

New Certificates and Certifications

ENMUR now offers both degrees in Occupational Safety Engineering and Environmental Management as well as two entry certificates and four different certifications:
• Safety Trained Technician certificate -Level 1
• Safety Trained Manager certificate
• Certified Occupational Safety Technician (COST)
• Certified Occupational Safety and Health Specialist (COSHS)
• Certified Occupational Safety and Environmental Technician (COSET)
• Certified Occupational Safety and Health Trainer (COSHT)Jan 2016
• AAS – Occupational Safety Engineering and Environmental Management

* Many of the certificates or certifications can be completed within one semester (8-16 weeks) at ENMUR either on-line, in-class, or a combination of the two.

For more information on the safety programs offered, contact Michael O’Berry @ 575-624-7381 or mike.oberry@roswell.enmu.edu